---
title: "Color-Changing Landscape Lighting, Zones, Dimming | Naples"
description: "Zoning, dimming and color-changing landscape lighting in Naples: how a property is divided into zones, what level each one runs at, and where color belongs."
canonical_url: "https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options"
last_updated: "2026-11-08"
language: "en"
---

![An agave in front of a long plain wall at dusk](https://www.nightscapeslandscapelighting.com/img/ns-tech-silhouette-off-1600.webp)

Specialty

# Zoning, dimming and color for landscape lighting in Naples, FL

Zones are how a lit property is edited. With them, the path can stay on while the garden dims, the pool can turn blue while the palms stay warm, and the whole place can be quiet at midnight without anyone touching a switch.

[Ask about zones](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#sv-book)

Tell us about the property

If everything is on one switch

## What zoning, dimming and color let you change on a Naples property

If every light on your property goes on and off together at one brightness, you cannot set the evening the way you live it. Zoning splits the lights into groups. Dimming sets each group to any level. Color, on fixtures that support it, changes what one group gives off while the rest stays warm white.

A system on one switch has one setting, and it is wrong most of the time. Bright enough for a party is too bright at midnight. Low enough for a quiet evening is too dark for the walk to the car. The pool light cannot go off without the garden going with it.

FX Luminaire, whose controllers and fixtures we use, puts the three ideas simply. Zoning "allows lights to be programmed into preset groups." Dimming "allows lights to emit any desired illumination percentage." And on fixtures built for it, color can change to one of what FX describes as "30,000 color options per zone."

The technology is the easy part. The design work is deciding where the lines between zones go and what level each one runs at, which is what this page is about.

[Ask about zones](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#sv-book) [or call (239) 649-6940](tel:+12396496940)

![Trees lit in magenta beside a sculpture lit warm in a garden at night](https://www.nightscapeslandscapelighting.com/img/ns-fx-luxor-color-garden-570.webp)

Two zones side by side: color on the trees, warm white on the sculpture.

Zoning

Groups of lights switched on their own: paths, decoration, front, back, water.

Dimming

Any level for each group, not just on or off. FX: 1 percent steps.

Color

Only on fixtures built for it, and only where it belongs.

![Illustration of a waterfront house at dusk with a fountain in a paved motor court, framed by palms](https://www.nightscapeslandscapelighting.com/img/ns-estate-off-1280.webp)

Illustration of one house in five zones. Drag a knob up or down, or focus it and use the arrow keys.

1. ### The entry The front door and its arch: the brightest thing on the elevation and the zone most often adjusted, up for guests, down late at night. It is on its own because nothing else should move when it does. Level Highest on the property in the evening; low and steady overnight. Shares with Nothing. The entry is always its own zone.
2. ### The water feature A fountain is often the centerpiece in the evening and switched off later, when its movement and sound are not wanted. It is the zone most likely to take color for an occasion, so it stands alone. Level Full in the evening, off or very low late. Shares with Nothing, so its color can change on its own.
3. ### The walls either side The wings of the house are washed together, at a level a step below the entry. Left and right are usually one zone, because a facade lit unevenly from side to side looks like a fault. Level Supporting the entry, never matching it. Shares with Its mirror image on the other side.
4. ### The palms The tallest things on the property, lit from their bases. They set the height of the picture and are the first zone to dim late in the evening, so the house stays the subject. Level Strong at dusk, stepping down after the evening. Shares with The palms on the other side, as one group.
5. ### The drive and the ground The paving, the path lights and the planting at the front edge. It is the zone that stays on longest, because it is the one people need to arrive and leave by. Level Low, and on latest. Shares with Path lights on the same route; never the decorative zones.

![A rectangular pool in a courtyard at dusk, house wall on the right and planting on the left](https://www.nightscapeslandscapelighting.com/img/ns-tech-underwater-off-960.webp)

### Everything at full

Every zone at its maximum. It is bright, and it is flat: the pool, the wall and the planting compete, and nothing leads. This is how most systems without dimming run all night.

### Balanced in the low range

The pool leads, the planting sits a little below it, the house wall lower again. None of these levels is high; the scene works because they differ. Most of a good design is decided down here.

### Late at night

Decorative zones almost out, the planting a glow, one low light on the wall by the door. Enough to see the courtyard from the bedroom window, and quiet enough to sleep beside.

Illustration of one courtyard with four zones: pool, house wall, planting and the back wall.

- ![A paved garden walk curving past lit planting toward a pergola at night](https://www.nightscapeslandscapelighting.com/img/ns-job-garden-walk-pergola-480.webp) ### Walkways and decoration Why apart Paths stay on late for people coming and going; decoration steps down earlier. If shared Dim the garden and you dim the way to the car. So Path and step lights always get their own zone.
- ![Palms and planting lit outside a screened lanai at night, seen from beside the house](https://www.nightscapeslandscapelighting.com/img/ns-job-screened-lanai-palms-960.webp) ### Front and back Why apart The front is seen from the street; the back is lived in from the lanai. If shared A party on the lanai lights up the front all night. So Each side of the house runs on its own.
- ![A private dock on a canal at night with green, blue and magenta light in the water beside it](https://www.nightscapeslandscapelighting.com/img/ns-dock-color-960.webp) ### Water and land Why apart Pool, fountain and dock lights are switched for the evening; planting is not. If shared The pool cannot go off for a quiet night without the garden going dark too. So Every body of water is its own zone, and so is its color.

Boundaries

## Zones for the water side, the beach side and the neighbors

Some zones exist because of who is on the other side. A seaward zone lets beach-facing fixtures follow sea turtle rules for the season while the street side is unchanged. A water zone keeps dock and pool color apart from the garden. A boundary zone lets lights near a neighbor run lower or end earlier.

![A waterfront house at blue hour with its street side and water side lit separately](https://www.nightscapeslandscapelighting.com/img/ns-hero-estate-bluehour-960.webp)

Street side and water side: two zones, two schedules.

### The beach side

On a Gulf-front lot the fixtures visible from the sand go on their own zone, because sea turtle rules may require them off or changed for the season. Color has no place on that zone: FWC’s certification criteria rule out color-change options. The details are on [what changes on the beach side during nesting season](https://www.nightscapeslandscapelighting.com/turtle-friendly-lighting).

### The water side

Pool, fountain and dock lights are switched by the evening and are the most likely to take color. On their own zones, they can be blue for a party and off for a quiet night without touching the garden. See [pool deck and screen enclosure lighting](https://www.nightscapeslandscapelighting.com/pool-lanai-lighting) and [color below the waterline at the dock](https://www.nightscapeslandscapelighting.com/underwater-dock-lighting).

### The neighbors

Fixtures near a property line, or facing a neighbor’s windows, can sit on a zone that runs a little lower and ends a little earlier than the rest. It takes nothing from the look of the property and it is the easiest way to keep the peace on a close lot.

![A broad shade tree in a front lawn at dusk with two path lights at its bed](https://www.nightscapeslandscapelighting.com/img/ns-tech-cross-off-960.webp)

### Warm white, most of the year

The tree in the same warm white as everything else. This is how a color-capable fixture spends most of its life. If it does not look right in warm white, color will not save it.

The tree

Warm white, the designed level.

The path lights

Warm white. They never change.

### A cool accent

Blue on a canopy reads as moonlight in a way warm white cannot, and it is the color most often chosen for a quiet evening. It works because the path lights below it stay warm.

The tree

Blue, at a lower level than its warm white.

The path lights

Warm white, unchanged.

### Deepened green

A saturated green on foliage makes a tree look lush rather than lit. It is the subtlest color on planting, and the one most likely to be left on for a whole evening.

The tree

Green, close to its natural color, deepened.

The path lights

Warm white, unchanged.

### An occasion

Strong colors are for events: a party, a holiday, a team. They are stored as a scene, used for the night, and the tree goes back to warm white in the morning on its own.

The tree

Full color for the event.

The path lights

Warm white. Guests still need to see the walk.

Illustration: one tree on a color zone, two path lights on a warm white zone.

Mixed systems

## Color and standard fixtures on the same system

A system does not have to be all color or none. Only fixtures with Luxor technology work with the Luxor controller, at one of three levels: zoning only, zoning and dimming, or zoning, dimming and color. Most properties use color fixtures in a few places and zoning-and-dimming fixtures everywhere else.

![A covered outdoor room at night with color in the rafters and warm light below](https://www.nightscapeslandscapelighting.com/img/ns-job-outdoor-room-bar-fire-960.webp)

Color in the rafters and warm light below, on separate zones.

### Three levels of control

FX Luminaire states that "only fixtures or devices with Luxor Technology are compatible with the Luxor Controller," and that devices have "varying levels of control, including: 1) zoning, or 2) zoning/ dimming, or 3) zoning/dimming/color." It calls the second ZD and the third ZDC. The controller carries all three "using a simple two-wire path installation," so color and standard fixtures sit on the same cable.

### Why most fixtures should not be color fixtures

A color board makes white by mixing; FX’s guide describes ZDC boards using red, green, blue and white LEDs. A dedicated warm white fixture is the better choice wherever the light will be white all year, which is most places. Color fixtures go where color will actually be used.

### Stored colors and scenes

FX’s design guide says Luxor can "generate and save up to 250 colors" and "design up to 40 distinctive themes ranging from every-night living to holidays, parties, and special events." In practice a household uses a few: everyday, late night, away, and one or two for occasions. How those run on a schedule is covered under [schedules, scenes and the app](https://www.nightscapeslandscapelighting.com/smart-landscape-lighting).

Sources, read 2026-10-13: FX Luminaire, [Luxor controller](https://www.fxl.com/product/transformers/designer/luxor); FX Luminaire, [NP up light (ZD and ZDC options)](https://www.fxl.com/product/up-lights/designer/np); FX Luminaire, [Landscape lighting design guide (2021)](https://www.fxl.com/sites/fxl.com/files/fx-229-dg-lightingtraining-us-web.pdf).

Retrofit

## Zoning a system that is already in the ground

An existing system can usually be zoned. First every run is traced back to the transformer to see what it feeds. Fixtures with MR-16 sockets can often take zoning and dimming lamps; FX says its ZD MR-16 lamps work in any brand of low-voltage fixture. Where one cable feeds two zones, the run is split.

When a system needs more than that, see [reworking an older system into zones](https://www.nightscapeslandscapelighting.com/landscape-lighting-redesign).

[Ask about zones](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#sv-book)

Existing systemNightScapes Landscape Lighting

1. What is there Every run traced back to the transformer, with what it feeds.
2. What should be apart Paths, decoration, front, back and water marked as separate zones.
3. What the fixtures allow Which can take zoning and dimming lamps, and which need replacing.
4. Where runs split Cable that feeds two zones from one run, and where it can be divided.
5. The controller A controller that can address the zones, set in place of the old timer.
6. Levels balanced Each zone set and balanced on the property.

Traced first, zoned second, then set.

Who does the work

## Who draws the zones: NightScapes Landscape Lighting, Naples

NightScapes Landscape Lighting has designed outdoor lighting in Naples since 2006 (Todd since 1998). Todd and Sherry own and run it, outdoor lighting is the only work it does, it is a Hunter Preferred Contractor, and its Google Business Profile shows 63 reviews at 4.9. Zones are drawn from how you use the property, then set.

Before any zone is drawn we ask how the property is used: where you sit in the evening, which way guests arrive, which windows face the garden, whether the house is empty part of the year. The zones follow from the answers.

We work across Naples, Marco Island and Bonita Springs, and through Lee and Collier counties.

[Ask about zones](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#sv-book)

![A waterfront house at night with color on the water and warm light on the house](https://www.nightscapeslandscapelighting.com/img/ns-job-waterfront-home-color-reflection-960.webp)

Color on the water, warm white on the house.

Since 2006

Lighting properties in Naples and Southwest Florida.

Todd and Sherry

Family and locally owned. The owners are the people you deal with.

63 Google reviews

Rated 4.9 on the NightScapes Google Business Profile.

Hunter Preferred Contractor

Hunter Industries is the maker of FX Luminaire fixtures and Luxor controllers.

Choose a question

- [What is the difference between zoning, dimming and color?](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#zn-questions-0)
- [How many zones can a system have?](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#zn-questions-1)
- [Can I have color on some lights and warm white on others?](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#zn-questions-2)
- [Can I add zoning and dimming to lights I already have?](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#zn-questions-3)
- [Does the control box have to be outside?](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#zn-questions-4)
- [Can the pool or the water be used as part of a color scene?](https://www.nightscapeslandscapelighting.com/zoning-dimming-color-options#zn-questions-5)

Ask us about zones, dimming or color. Choose a question, or call and we will answer it on the phone.

### What is the difference between zoning, dimming and color?

Zoning divides the lights into groups that can be switched separately. Dimming sets each group to any level, not just on or off. Color changes what color a group of fixtures gives. FX Luminaire defines zoning as letting "lights to be programmed into preset groups" and dimming as letting lights "emit any desired illumination percentage."

### How many zones can a system have?

FX Luminaire states that its Luxor controller supports "up to 250 independently adjustable lighting zones." No house needs that many. Most need somewhere between a handful and a dozen, divided by what is used differently: paths, decoration, front, back and water.

### Can I have color on some lights and warm white on others?

Yes, and that is how color is best used. Only fixtures with color boards can change color; FX describes its ZDC fixtures as using red, green, blue and white LEDs. Those go where color is wanted, on their own zone, and every other fixture stays warm white.

### Can I add zoning and dimming to lights I already have?

Often, in part. FX Luminaire notes that its ZD MR-16 lamps can "add zoning and dimming capabilities to any brand of low-voltage lighting fixture," which covers many existing systems with MR-16 sockets. Where the wiring feeds two zones from one run, it may need splitting. We trace it before suggesting anything.

### Does the control box have to be outside?

The controller usually sits outside beside the house, near the transformer it replaces or works with. FX describes the Luxor enclosure as 304 stainless steel and powder-coated galvanized steel, made to live outdoors. Where it goes also depends on reaching power and, for app control, the home network.

### Can the pool or the water be used as part of a color scene?

Yes. The pool or a fountain is often the best place for color, because water carries it and the planting around can stay warm. The water goes on its own zone so it can change color, or switch off for a quiet evening, without touching anything else.

[Ask us on the phone: (239) 649-6940](tel:+12396496940)

Close to this

- [Smart lighting control Schedules, scenes and the app](https://www.nightscapeslandscapelighting.com/smart-landscape-lighting)
- [Pool and lanai lighting Pool deck and screen enclosure lighting](https://www.nightscapeslandscapelighting.com/pool-lanai-lighting)
- [Underwater lighting Color below the waterline at the dock](https://www.nightscapeslandscapelighting.com/underwater-dock-lighting)

Free Consultations and Estimates

## Ready to set the evening the way you live it?

Tell us how the property is used: where you sit, how guests arrive, whether there is water, and whether you want color anywhere. We draw the zones with you and set each level.

- Zones drawn from how you live
- Each level set with you
- Free consultation and estimate

[or call (239) 649-6940](tel:+12396496940)

Tell us about the property
