--- title: "Hurricane and Storm Damage Lighting Repair, Naples FL" description: "After a hurricane or tropical storm in Naples, FL, landscape lighting is restored in order: power made safe, flooded parts checked, runs repaired, aim reset." canonical_url: "https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair" last_updated: "2026-10-22" language: "en" --- ![A garden walkway with path lights, after a storm and after it was put right](https://www.nightscapeslandscapelighting.com/img/ns-scene-storm-off-1600.webp) Service and repair # Putting landscape lighting right after a storm in Naples After a storm the lighting is the last thing on anyone's mind, and the first temptation is to switch it on and see what works. Don't. It is put right in order, from the power outward, and the order is what keeps it safe. [Ask about storm repair](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#sv-book) [or call (239) 649-6940](tel:+12396496940) Tell us what happened Illustration: after the storm at left, put right at right If a storm has just passed ## What to do about the lights in the first days after a storm If a storm has just come through and the lights are out or acting strangely, leave the system off, especially if the transformer or its outlet got wet. Walk the property in daylight and note what moved, what is under water or sand, and where cable is showing. Do not reset a tripped outlet to see what happens. A landscape lighting system is low voltage at the fixtures, but the transformer that feeds it plugs into the house supply. If floodwater, rain driven by wind or a surge reached that outlet or the transformer, switching on is the one thing not to do. A tripped ground fault outlet after a storm is a device doing its job. What helps most in the first days is a careful look in daylight and some notes. Which fixtures are leaning or flat, which are buried, which are under water, where the cable has come up, and how high the water got near the transformer. Photographs, dated, are better still, especially for an owner who is away and relying on someone else to look. Then the system is put right in a fixed order, from the power outward. That order is the middle of this page. [Ask about storm repair](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#sv-book) [or call (239) 649-6940](tel:+12396496940) ![A coconut palm leaning over a rock waterfall and pond at dusk](https://www.nightscapeslandscapelighting.com/img/ns-job-palm-rock-waterfall-480.webp) A coconut palm over a pond. After a storm, everything near water is checked first. Do Leave the system off, walk it in daylight, note and photograph what you see. Do not Reset a tripped outlet, switch on to test, or handle exposed cable. Then Have it checked from the power outward, before it is relied on. - ![Illustration of a garden walk after heavy weather, with path lights knocked over and debris on the pavers](https://www.nightscapeslandscapelighting.com/img/ns-scene-storm-off-960.webp) Illustration ### Debris on fixtures What happens Fronds, branches and roof debris land on fixtures, crack lenses and bend stems. What to look for Fixtures under debris, cracked glass, heads knocked flat. Leave it? Clear what is on top. Do not stand a broken fixture back up and switch on. - ![Illustration of a garden walk after heavy weather, with path lights knocked over and debris on the pavers](https://www.nightscapeslandscapelighting.com/img/ns-scene-storm-off-960.webp) Illustration ### Stakes pulled and fixtures knocked flat What happens Saturated ground lets stakes lean. A tree that tips lifts the cable with its root plate. What to look for Fixtures pointing at the sky or the house; cable showing at the surface. Leave it? Note it and leave exposed cable alone until the system has been checked. - ![The trunk and limbs of a live oak lit at night, with low planting lit beneath it](https://www.nightscapeslandscapelighting.com/img/ns-job-live-oak-uplit-960.webp) ### Fixtures in the trees What happens Limbs shift, downlights turn, and the cable running up the trunk is pulled or snagged. What to look for A downlight aimed at the house, or cable hanging from a limb. Leave it? Yes. Tree work after a storm is for the arborist first, then us. - ![A paved garden walk curving past lit planting toward a pergola at night](https://www.nightscapeslandscapelighting.com/img/ns-job-garden-walk-pergola-480.webp) ### Buried by sand and mulch What happens Wind and water move sand and mulch, and low fixtures disappear under it. What to look for Path lights and well lights you can no longer find. Leave it? Mark where they are. They are dug out during the repair, not before. Illustration, not to scale. Drag the water up or down on the drawing, or use the slider. ### Rain flooding Fresh water from rain and runoff gets into sockets, fixtures and splices that were never meant to be submerged. Much of it dries out, and parts that have dried and are not corroded can often return to service once checked. Fixtures that held water against the lamp, or have fogged lenses, need opening. ### Storm surge and salt water Salt water is different. When it drains away, the salt stays behind on sockets, splices and terminals and keeps working on them. FEMA notes that ocean salts "accumulate on metal surfaces and accelerate the electrochemical reactions that cause rusting." A part that looks dry can be corroding inside. Anything a surge reached is treated as salt damaged until it is opened. Salt keeps working after the water has gone. ### Why damp lasts FEMA also notes that "the longer a surface remains damp," the higher the corrosion rate. After a storm the ground stays wet for days and enclosed fixtures stay damp longer. That is why water damage often shows weeks later, as a run that flickers or a fixture that finally goes dark. Source, read 2026-10-13: FEMA, [Technical Bulletin 8, Corrosion protection for metal connectors in coastal areas](https://www.fema.gov/sites/default/files/2020-07/tb8-corrosion_protection_metal_connectors_coastal_areas.pdf). ![A waterfront house at dusk with a fountain in a paved motor court, framed by palms](https://www.nightscapeslandscapelighting.com/img/ns-estate-off-1280.webp) Storm repair, step by step ## The order a system is put right A damaged system is restored from the power outward, never by switching on and seeing what lights. Each step makes the next one safe and tells it where to look. Scroll through the order on this illustration, from everything off to everything aimed. First ### Power made safe The outlet and the transformer’s supply are checked before anything is energized. If water reached them, they stay off until they are inspected, and anything damaged is replaced. Checked Outlet, cover, ground fault device, cord. Lights on None yet. Second ### Transformer and controls The transformer, its terminals and its timer or controller are opened and checked for water, salt and surge damage. Only when the cabinet is sound does any run get power. Checked Terminals, breaker, timer, photocell. Lights on The first run, to test it. Third ### Main runs and splices Each run is brought up and measured. Cut cable, flooded splices and corroded connections are found and remade, run by run, until each section of the property is powered. Checked Every splice the water reached. Lights on Section by section. Fourth ### Fixtures Fixtures that held water, cracked or bent are opened, dried, repaired or replaced. Buried ones are dug out and reset at grade. Checked Lenses, sockets, seals, stems. Lights on Nearly everything. Last ### Aim reset, and a record made Only then is the system re-aimed against whatever the storm left standing. Everything that was found and done is written down, so the next storm starts from a known state. [Ask about storm repair](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#sv-book) At the cabinet ## The transformer and the outlet after flooding The transformer is the part of the system tied to the house supply, so it is checked first and never switched on wet. How high it was mounted, and whether water reached it, decide what happens next. A ground fault device that trips is doing its job. A soaked transformer is not energized to see what happens. ![A drawn cutaway of a landscape lighting transformer cabinet beside its outlet](https://www.nightscapeslandscapelighting.com/img/ns-cabinet-diagram-960.webp) Illustration of a transformer cabinet and its outlet. ### Where it was mounted Transformers are usually mounted on a wall or post near an outdoor outlet. If the water line came up to it, or near it, it is treated as flooded. If the water stayed well below and the cabinet is dry inside, it may be fine, and it is still opened and looked at before power goes back on. ### The ground fault device Outdoor outlets are usually protected by a ground fault device that cuts power when current leaks where it should not, which water makes likely. If it trips after a storm, that is protection working. Resetting it again and again, or bypassing it, removes the one thing standing between a wet fault and the house supply. A tripped outlet after a storm is not a problem to be reset. It is a warning to be heeded. ### Repair or replace A transformer that sat in salt water usually has corrosion at its terminals and is often replaced. One that stayed dry may only need its connections cleaned and tightened. The cabinet in detail is on [a transformer cabinet that took on water](https://www.nightscapeslandscapelighting.com/landscape-lighting-transformer-repair). Sources, read 2026-10-13: FEMA, [Technical Bulletin 8, Corrosion protection for metal connectors in coastal areas](https://www.fema.gov/sites/default/files/2020-07/tb8-corrosion_protection_metal_connectors_coastal_areas.pdf); NOAA National Hurricane Center, [Tropical cyclone climatology](https://www.nhc.noaa.gov/climo/). ![The trunk and limbs of a live oak lit at night](https://www.nightscapeslandscapelighting.com/img/ns-job-live-oak-uplit-960.webp)![Slender trees lit at night](https://www.nightscapeslandscapelighting.com/img/ns-job-palm-stand-night-960.webp)![An estate at dusk with palms and planting lit along a drive](https://www.nightscapeslandscapelighting.com/img/ns-job-curving-drive-palms-night-960.webp) A canopy that thinned in a storm needs its light reset.Fixtures follow the trees that are still standing.What a hedge hid, the street can now see. 1. ### Lost canopy A tree that lost half its crown no longer carries the light it was aimed at. Uplights reach a thinner canopy and look harsh; moonlights in it have less to shine through. The fixtures are re-aimed, lowered, or moved to the tree that took its place. 2. ### Trees that are gone Where a tree was removed, its uplights now aim at a gap and any downlight in it has no home. Those fixtures are relocated to what is left, or retired, and the run is tidied so nothing is left powered in an empty bed. 3. ### New sight lines With planting gone, fixtures that were hidden can now be seen from the street or the water, and lamps that were shielded by a hedge face straight at a neighbor. Those are re-aimed or re-shielded first. If the layout no longer makes sense, it is time for [reworking the layout around the trees that are left](https://www.nightscapeslandscapelighting.com/landscape-lighting-redesign). Before anything is moved, tick what you have **0** of 6 ### Ready to send That is the whole list. Send it with the photographs, and the repair starts from what you saw rather than from a guess. ### Nearly there Worth finishing before anything is cleared. The transformer and any exposed cable matter most. ### Start with the transformer Where it is and how high the water came. Then walk the property in daylight with a phone and work down the list. For an owner who is away, this is the list to send to whoever is looking at the property. 1. Question 1 of 3 Did water reach the transformer or the outlet it plugs into? 2. Question 2 of 3 Is any cable showing above ground? 3. Question 3 of 3 Is anything broken, knocked over or buried where people walk? Where each answer leads Our answer ### First: anything energized or exposed A wet transformer, an outlet that took water, or cable showing where people walk. It is a safety matter before it is a lighting matter. Leave the system off and keep people away from exposed cable until it is checked. [The order of repair →](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-order) Our answer ### Next: anything in a walking path Path and step lights knocked over or buried, broken glass at a fixture. People will walk there in the dark before the lights are back, so mark them or move debris clear by daylight. [What to write down →](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-record) Our answer ### Later: how it looks Aim, lenses, levels and the overall picture. It matters, and it can wait until everything else is safe and working. It is set at the end of the repair. [When the landscape has changed →](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-changed) Who does the work ## Who puts it right: NightScapes Landscape Lighting, Naples NightScapes Landscape Lighting has worked on landscape lighting in Naples since 1998, through every storm season since. Todd and Sherry own and run it, outdoor lighting is the only work it does, and its Google Business Profile shows 63 reviews at 5.0. A storm repair is done in order, from the power outward. We work on the coast and inland across Naples, Port Royal, Aqualane Shores, Royal Harbor, Pelican Bay, Grey Oaks and Marco Island, and through Lee and Collier counties. Waterfront systems take the worst of it; for docks and anything below the waterline see [fixtures on the dock and below the waterline](https://www.nightscapeslandscapelighting.com/underwater-dock-lighting). For faults that have nothing to do with weather, see [everyday faults that have nothing to do with weather](https://www.nightscapeslandscapelighting.com/landscape-lighting-repair). And the best preparation for the next season is in [a yearly maintenance program](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance). [Ask about storm repair](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#sv-book) ![A NightScapes Landscape Lighting van at a client property](https://www.nightscapeslandscapelighting.com/img/nightscapes-service-van-480.webp) A NightScapes van on a service call. Since 1998 Lighting properties in Naples and Southwest Florida. Todd and Sherry Family and locally owned. The owners are the people you deal with. 63 Google reviews Rated 5.0 on the NightScapes Google Business Profile. Lee and Collier counties Naples, Marco Island, Bonita Springs, Fort Myers, Sanibel and Captiva. Choose a question - [What should I do with my outdoor lights right after a hurricane?](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-questions-0) - [Can LED outdoor lighting withstand flood water?](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-questions-1) - [What if my lighting system was flooded?](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-questions-2) - [The transformer has a red light or keeps tripping. Is that normal after a storm?](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-questions-3) - [Lightning struck nearby and the lights stopped. Are they ruined?](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-questions-4) - [When is hurricane season?](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair#hs-questions-5) Ask us about storm damage. Choose a question, or call and we will answer it on the phone. ### What should I do with my outdoor lights right after a hurricane? If the transformer or its outlet got wet, leave the system off. Walk the property in daylight and note what moved, what is under water or sand, and where cable is showing. Do not reset a tripped outlet or switch the system on to see what works. Then call, and tell us what you found. ### Can LED outdoor lighting withstand flood water? Fixtures built for wet locations are sealed against rain and splash, and some are made to be submerged. A flood is different: water can reach splices, sockets and the transformer, and salt water leaves corrosion behind. LED fixtures may well survive; whether they do is found by checking them, not by assuming. ### What if my lighting system was flooded? Treat it as off until it has been checked from the power outward: outlet, transformer, runs, then fixtures. Fresh water and salt water are different problems, so tell us which it was and how high it came. Anything that sat in salt water is opened, because salt keeps working after the water has gone. ### The transformer has a red light or keeps tripping. Is that normal after a storm? It means something is wrong, and often that the transformer or a ground fault device is protecting itself from a fault, such as water in a run. Do not keep resetting it. A tripping device after a storm is a reason to stop and check, which is the second step in the order on this page. ### Lightning struck nearby and the lights stopped. Are they ruined? Not necessarily. A surge can damage the transformer, its controls or the fixtures, or only one of them. The NWS Miami office calls Florida "the lightning capital" of the United States, so it is a common question here. The system is checked from the cabinet outward before anything is replaced. ### When is hurricane season? NOAA’s National Hurricane Center puts the Atlantic hurricane season at June 1 to November 30. The time to prepare the lighting is before it starts: know where the transformer is and how to switch it off, keep a record of where fixtures were aimed, and fix anything loose. [Ask us on the phone: (239) 649-6940](tel:+12396496940) Close to this - [Lighting repair Everyday faults that have nothing to do with weather](https://www.nightscapeslandscapelighting.com/landscape-lighting-repair) - [Underwater lighting Fixtures on the dock and below the waterline](https://www.nightscapeslandscapelighting.com/underwater-dock-lighting) - [Maintenance plans A yearly maintenance program](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance) Free Consultations and Estimates ## Ready to have it checked from the power outward? Tell us what happened: whether water reached the transformer, what you can see out of place, and whether it was rain or surge. We start at the outlet, not at the fixtures. - Power made safe first - Runs, splices and fixtures in order - Free consultation and estimate [or call (239) 649-6940](tel:+12396496940) Tell us what happened