--- title: "Landscape Lighting Maintenance Plans in Naples, FL" description: "Yearly landscape lighting maintenance in Naples, FL: aim reset after dark as palms grow, lenses cleaned, connections and controls checked, season by season." canonical_url: "https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance" last_updated: "2026-10-22" language: "en" --- ![A stone path curving through planting at dusk with low fixtures along its edge](https://www.nightscapeslandscapelighting.com/img/ns-tech-path-off-1600.webp) Service and repair # A year of lighting maintenance for Naples properties Nothing has to break for landscape lighting to look worse. Palms grow, beds fill in, salt settles and the clock changes. A yearly visit, after dark, puts back what the year moved. [Ask about maintenance](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#sv-book) Tell us about your system ![A broad shade tree in a front lawn at dusk with two path lights at its bed](https://www.nightscapeslandscapelighting.com/img/ns-tech-cross-off-960.webp) Landscape lighting maintenance ## What a lighting system in Naples needs over a year If you come back in the fall and the lighting looks tired, nothing may have broken. Palms grew out of their beams, planting swallowed fixtures, salt filmed the lenses and the clock changed under the timer. A Naples year does four different things to a lighting system. Scroll through them. ## Dry season, when the lights are used most From fall into spring the sunsets are early, the clocks have changed, and owners and guests are back. This is when the lighting is seen most, so it is set right just before: schedule and timer checked against the new sunset, aim reset after a summer of growth, lenses cleaned. Set Schedule, aim and lenses, before the house fills up. Why now It is the season the lighting is for. ## Spring, before the rain and the growth Before the wet season starts, everything that will be overgrown by summer is cleared: planting cut back from fixtures, lights that beds have swallowed raised or reset, mulch pulled off lenses, spray heads turned away from glass. It is the last chance before many seasonal owners leave. Cleared Growth, mulch and irrigation film around every fixture. Why now Summer growth will bury anything left low. ## Summer, with daily rain and an empty house The ground stays wet, irrigation runs, and plants grow faster than at any other time, often around a house nobody is living in. A manager or neighbor can check from the drive at dusk that the system came on. Anything more waits for a visit, unless something is plainly wrong. Checked From the drive at dusk: on or off, any zone dark. Waits Aim and cleaning, unless a fault shows. ## Storm season, and what is done ahead of it NOAA puts the Atlantic hurricane season at June 1 to November 30. Before a storm, three things help: knowing where the transformer is and how to switch it off, a record of where every fixture was aimed, and loose fixtures re-set so wind cannot take them. What happens after a storm is a separate job. Before Transformer located, positions recorded, loose fixtures fixed. After See our storm damage page. And round again ### Then it is fall, and the lights are reset The visit before the season puts back everything the summer moved: aim, levels, schedule and lenses. The property looks the way it did on the night it was installed, which is the whole point of doing this every year. [Ask about maintenance](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#sv-book) > Guys were punctual, knowledgeable and quick. Look forward to seeing them in the spring. ![A broad shade tree in a front lawn at dusk with two path lights at its bed](https://www.nightscapeslandscapelighting.com/img/ns-tech-cross-off-960.webp) ### Aimed in daylight In daylight you can see where a fixture points but not what its light does. The beam falls a little high, a little to one side, catches the back of a shrub. The tree is lit, sort of. Set in daylight, it is a guess. ### Aimed after dark At night the light shows exactly where it lands, where it glares and where it spills. The fixture is moved until the canopy is lit and the path lights pool where they should. Glare and spill only exist at night, so that is when they are fixed. Illustration of one tree and two path lights. The difference on a real property is usually larger, because there are more fixtures to drift. On a visit ## What is cleaned, tightened and tested on a visit A maintenance visit does six things, the same six this page has always listed: re-aim every fixture after dark, clean lenses and clear growth, check connections, replace lamps that have shifted, check the transformer and timer, and note fixtures that are starting to corrode. Together they are what keeps a system looking new. Lamp detail is on our relamping page, and the cabinet on [the timer and photocell at the transformer](https://www.nightscapeslandscapelighting.com/landscape-lighting-transformer-repair). [Ask about maintenance](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#sv-book) Maintenance visitNightScapes Landscape Lighting 1. Re-aim Every fixture checked against what it lights, after dark, and moved back on target. 2. Clean lenses, clear growth Mineral film and salt wiped off; planting and mulch cleared from around each fixture. 3. Check connections Splices and terminals looked at for corrosion, which is where faults start. 4. Replace lamps that have shifted Lamps that have dimmed or changed color replaced, so neighbors still match. 5. Transformer and timer Voltage, load and the schedule checked at the cabinet. 6. Note corroding fixtures Bodies and finishes that are failing written down before they fail. Done after dark, every fixture. ![The front of an estate at night with its lighting on](https://www.nightscapeslandscapelighting.com/img/ns-job-estate-front-palms-960.webp)![Palms along a drive lit at dusk](https://www.nightscapeslandscapelighting.com/img/ns-job-curving-drive-palms-dusk-960.webp)![An estate drive at dusk with palms and planting lit](https://www.nightscapeslandscapelighting.com/img/ns-job-curving-drive-palms-night-960.webp)![An estate at blue hour, house and palms lit](https://www.nightscapeslandscapelighting.com/img/ns-job-motor-court-bluehour-palms-960.webp) A system that looks the same every year has readings that stay the same.A row of palms stays even when its lamps are replaced as a group.The record shows where the system is wearing.The record tells you when a system has outgrown maintenance. 1. ### Readings Voltage at the transformer and at the ends of the runs, written down each visit. A reading that creeps from one year to the next is a connection starting to go, found before a single light is dark. 2. ### Lamp dates Which lamps went in where and when. When the lamps in one view have aged together, they are replaced together, so the view stays one color. See [group relamping once the lamps have aged together](https://www.nightscapeslandscapelighting.com/landscape-lighting-bulb-replacement). 3. ### Replaced fixtures Every fixture replaced, and why. A pattern in that list, such as one run losing fixtures every year, says something a single visit cannot. It is often the point where maintenance stops being the answer. 4. ### When maintenance is not enough Some things a visit cannot fix: a halogen system that keeps failing, a layout the planting has outgrown, a transformer at its limit. The record makes that call clear. Then it is [a fault that needs a repair visit](https://www.nightscapeslandscapelighting.com/landscape-lighting-repair), a conversion, or a rework. Illustration: one front garden at dusk. Tap where something looks wrong. Found **0** of 4 1. 1 *?* 2. 2 *?* 3. 3 *?* 4. 4 *?* Four things are wrong in this garden at dusk. Tap where you see one. A fixture leaning or knocked flat A mower, a dog or soft ground after rain. Leaning, it lights the wrong thing; knocked flat, it can shine into eyes. Photograph it and leave it for the visit. Do not push the stake back into wet ground with the system on. One dimmer than its neighbors Two palms that were lit the same and are not any more. The lamp has aged, the lens has filmed over with salt or irrigation water, or the connection is starting to go. One dim light among bright ones is often the first sign of a connection. One buried by mulch or planting Beds fill in and mulch is topped up over fixtures. A buried light lights only leaves. Note it; it is cleared, raised or moved on the visit, rather than the planting cut hard. A place where light used to fall and now does not The oak was lit and is not. One fixture dark is usually the fixture or its connection; a whole area dark is usually a fault on its run. Either is worth a call, with a photograph. ### From the drive, if you are away For a house that is empty for the summer, the person who checks on it can do the same from the car: did the lights come on at dusk, is any whole area dark, is anything on that should not be. A whole zone dark is usually a fault on its run; one fixture dark is usually the fixture or its connection. Either is worth a call, with a photograph. ### What not to do Do not reset a tripped outlet over and over, push a leaning stake back into wet ground with the system on, or dig around a fixture to find its cable. Note it, photograph it, and leave it for the visit. If a fixture is plainly damaged or a cable is showing where people walk, call sooner. ### Why it helps A visit goes further when it starts from a list. A note that the second palm on the left went dim in August tells us to look at its connection and its lens before anything else, and it often means a problem is caught while it is still a small one. Who does the work ## Who does the visit: NightScapes Landscape Lighting, Naples NightScapes Landscape Lighting has looked after landscape lighting in Naples since 1998. Todd and Sherry own and run it, outdoor lighting is the only work it does, and its Google Business Profile shows 63 reviews at 5.0. Customers mention the yearly maintenance program by name in their reviews, which is the best description of it we have. The people who look after a system are, in most cases, the people who put it in, which is why the visits are short: we know where everything is and why it was aimed there. We work across Naples, Port Royal, Pelican Bay, Grey Oaks, Old Naples and Marco Island, and through Lee and Collier counties. What the program includes for your property, and when the visits fall, we set out with you. Palms are usually the biggest reason for it: see [uplights set against royal and coconut palms](https://www.nightscapeslandscapelighting.com/tree-palm-uplighting). After a named storm, see [what is done after a named storm](https://www.nightscapeslandscapelighting.com/storm-damage-lighting-repair). > I especially recommend taking the yearly maintenance program. [Ask about maintenance](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#sv-book) ![A NightScapes Landscape Lighting service van parked at a client property](https://www.nightscapeslandscapelighting.com/img/nightscapes-service-van-480.webp) A NightScapes van on a service call. Since 1998 Lighting properties in Naples and Southwest Florida. Todd and Sherry Family and locally owned. The owners are the people you deal with. 63 Google reviews Rated 5.0 on the NightScapes Google Business Profile. Lee and Collier counties Naples, Marco Island, Bonita Springs, Fort Myers, Sanibel and Captiva. Choose a question - [How often should landscape lighting be maintained?](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#mp-questions-0) - [Do LED landscape lights still need maintenance?](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#mp-questions-1) - [Will a maintenance visit damage my landscaping?](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#mp-questions-2) - [Why is aim checked at night?](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#mp-questions-3) - [What should I look for between visits?](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#mp-questions-4) - [Can a one-time service visit be booked?](https://www.nightscapeslandscapelighting.com/landscape-lighting-maintenance#mp-questions-5) Ask us about maintenance. Choose a question, or call and we will answer it on the phone. ### How often should landscape lighting be maintained? At least once a year, timed for the season the lighting is used most, which in Naples is the dry season from fall into spring. Properties where planting grows fast or palms are the main event benefit from more than one look a year. What the program includes for your property is something we set out with you. ### Do LED landscape lights still need maintenance? Yes. LED changed the lamp, not the garden. Palms still grow out of their beams, beds still swallow fixtures, salt still films the lenses, and connections still corrode. An LED system needs fewer lamps replaced and the same attention to aim, cleaning and connections. ### Will a maintenance visit damage my landscaping? It should not. Most of the work is at the fixtures themselves: aiming, cleaning and checking connections. Where planting has grown over a fixture, the fixture is moved or raised rather than the plant cut hard, and anything that would change your planting is talked through first. ### Why is aim checked at night? Because light only shows what it does in the dark. In daylight you can see where a fixture points, not where its light lands, where it glares or where it spills onto the house next door. A system aimed by day is a guess; aimed after dark, it is set. ### What should I look for between visits? Walk the property at dusk now and then. Look for a fixture that is tilted or knocked over, one dimmer than its neighbors, one covered by mulch or planting, and any place where light used to fall and now does not. Note them, and they get dealt with on the next visit or sooner if something is out. ### Can a one-time service visit be booked? Ask us. If a system needs setting right once, for example before the season or before selling a house, we can look at what it needs. If something is not working, that is a repair visit, which is covered on our lighting repair page. [Ask us on the phone: (239) 649-6940](tel:+12396496940) Close to this - [Lighting repair A fault that needs a repair visit](https://www.nightscapeslandscapelighting.com/landscape-lighting-repair) - [Tree and palm uplighting Uplights set against royal and coconut palms](https://www.nightscapeslandscapelighting.com/tree-palm-uplighting) - [Transformer and timer The timer and photocell at the transformer](https://www.nightscapeslandscapelighting.com/landscape-lighting-transformer-repair) Free Consultations and Estimates ## Ready to have it looking like the first night again? Tell us about the system: how old it is, who installed it, and what has changed since. We will look at it with you and tell you what a yearly program would do for it. - Aim reset after dark - Lenses, connections and controls - Free consultation and estimate [or call (239) 649-6940](tel:+12396496940) Tell us about your system