---
title: "Low Voltage vs Line Voltage Landscape Lighting in Florida"
description: "How 12 volt and 120 volt landscape lighting differ in Florida: the transformer, wire, safety near water, what state law exempts, and which suits a sandy yard."
canonical_url: "https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting"
last_updated: "2026-10-26"
language: "en"
---

![A curved pool reflecting a lit screen of bamboo and palms at dusk](https://www.nightscapeslandscapelighting.com/img/ns-job-pool-bamboo-screen-1600.webp)

# Low Voltage or Line Voltage Landscape Lighting in Florida: How They Differ

Low voltage vs line voltage landscape lighting comes down to where the 120 volts stops. A low-voltage system plugs a transformer into a 120-volt outlet and sends about 12 volts out to the fixtures \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. A line-voltage system carries the full 120 volts to every fixture in the yard, so every part of it is work for a licensed electrician.

[**By NightScapes Landscape Lighting** owners Todd and SherryAbout us](https://www.nightscapeslandscapelighting.com/about)

Published October 26, 2026 Last updated October 26, 2026

Free Consultations and Estimates

Low voltage is what most yards have. "Today, a majority of landscape lighting systems operate on 12 V," FX Luminaire's design guide says \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. This guide covers how the two differ, how to identify an inherited system by looking rather than touching, what Florida's statute exempts, and what water, salt and lightning change here.

Cost driver checker

Which system do I have?

Look, don't touch. This identifies the likely system. It is not an electrical inspection.

Pick what you see beside the house

A box with a power cord plugged into an outdoor outlet

Likely system

Low voltage: a plug-in transformer steps 120 volts down to about 12 for the fixtures.\[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]

Who does the work

Florida's s. 489.503(24) exempts a person who installs plug-in low-voltage landscape lighting that needs no change to a structure's wiring. A new outlet is for a licensed electrician.\[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\]

A box with no cord, wired into conduit or a junction box

Likely system

Low voltage on the yard side, with a hardwired 120-volt connection at the box.\[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]

Who does the work

The hardwired connection is 120-volt work for a licensed electrician; it is outside the plug-in exemption.\[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\]

Cables run into a junction box or the wall, and there's no transformer anywhere

Likely system

Treat it as line voltage, 120 volts.

Who does the work

A licensed electrician, before anyone works on it.

A fixture label that says 120 V

Likely system

Line voltage.

Who does the work

A licensed electrician.

A transformer label showing 12 V to 15 V output

Likely system

Low voltage. FX's LED fixtures operate between 10 and 15 VAC at each fixture.\[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]\[[6](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-6)\]

What to check next

Wire gauge and run length: incorrect wire size can drop the voltage past 10 VAC.\[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]

I can't tell

Likely system

Unknown. Treat it as 120 volts until an electrician has checked it.

What not to do

If you can't find a transformer, don't go looking for one inside the wall.

General information, not an electrical inspection or legal advice. Statute: Florida Statutes 2026, s. 489.503(24). Sources: FX Luminaire, The Florida Legislature.

### Key takeaways

- Low-voltage landscape lighting runs on about 12 volts from a step-down transformer fed by a 120-volt outlet; line voltage runs 120 volts to every fixture \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\].
- Start at the box beside the house: a transformer plugged into an outdoor outlet points to low voltage; cables into a junction box or the wall, with no transformer anywhere, mean you treat the system as 120 volts.
- Florida's s. 489.503(24) exempts a person who installs plug-in low-voltage landscape lighting that needs no change to a structure's wiring. Hardwired transformers, new outlets and line-voltage work are for a licensed electrician \[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\].
- FX Luminaire's LED fixtures need 10 to 15 volts at each fixture, so on a 12-volt system the wire gauge and run length decide whether the farthest light works properly \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\].
- Near a pool, look for a transformer listed for use near pools and spas, and leave anything at 120 volts to an electrician \[[6](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-6)\].

01The two systems

## What low voltage and line voltage mean

Low-voltage landscape lighting is, in FX Luminaire's definition, "a lighting system powered by a step-down transformer that reduces a 120 V power input to a 12 V output" \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. Line voltage is the household current itself, 120 volts in North America \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. A line-voltage system has no step-down transformer between the outlet and the fixtures, so every fixture and every cable carries 120 volts.

Landscape lighting started out at 120 volts. "Early landscape lighting systems operated on line-voltage installations," FX's guide notes; 12-volt fixtures arrived in the 1950s \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\].

|  | Low voltage (12 V) | Line voltage (120 V) |
| --- | --- | --- |
| Voltage at the fixture | About 12 V; FX LED fixtures run on 10 to 15 VAC \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\] | 120 V \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\] |
| Between the outlet and the fixtures | A step-down transformer, often plugged into an outdoor outlet \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\] | No step-down transformer |
| Cable in the yard | Two-conductor low-voltage cable, most often 16/2, 14/2 or 12/2 \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\] | A 120-volt circuit, sized and installed by an electrician |
| Who does the work in Florida | Plug-in systems that don't modify a structure's wiring are exempt under s. 489.503(24) \[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\]; hardwired transformers and new outlets are for a licensed electrician | A licensed electrician |

FX's guide states the trade-off: "In general, a low-voltage landscape lighting system is safer to manage compared to a line-voltage system" \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. It adds that in residential and light commercial installations, low-voltage "landscape lighting is usually more cost-efficient than line-voltage systems" \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\].

One line in that guide needs a Florida footnote. Among the benefits of low voltage, FX lists: "There is usually no need to hire a licensed electrician" \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. That guide is written for installers everywhere, not for Florida. Florida's statute is more specific than "usually," and the difference matters for anything that isn't a plug-in system.

02Which you have

## How to tell which system you have

You can usually tell low voltage from line voltage without touching a wire. Start at the house. A low-voltage system has a transformer, a box that steps 120 volts down to about 12, usually plugged into an outdoor outlet \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. If the cables from the fixtures run into a junction box or the wall, and there's no transformer anywhere, treat the system as 120 volts.

Work from the outside in. Use your eyes. Leave the screwdriver in the garage.

1. **Find the box.** Look near every outdoor outlet. FX tells installers that a transformer with a power cord goes "adjacent to the 120 V, GFCI-protected receptacle that it will be plugged into" \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. NightScapes' own transformer page puts it simply: "The transformer plugs into an outdoor outlet, usually protected by a ground fault device."
2. **Read the label without opening the box.** FX's PX transformer, for example, takes "120 VAC, 60 Hz" and has 12 V to 15 V multi-tap outputs \[[6](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-6)\]. An output in the 12 to 15 volt range means the yard side is low voltage.
3. **See how the box gets its power.** A power cord into an outlet means a plug-in transformer. A transformer with no cord, wired into conduit or a junction box, is hardwired, and that connection is 120-volt work.
4. **Look at the cable where it leaves the box.** Low-voltage systems use two-conductor landscape cable, and FX names 16/2, 14/2 and 12/2 as the most common sizes \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]. Look, don't pull.
5. **Check a fixture's label or model number.** FX's LED landscape fixtures operate between 10 and 15 VAC \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]. A fixture marked 120 V, or one with no transformer anywhere upstream, is line voltage.
6. **When in doubt, stop.** Treat any system you can't identify as 120 volts until an electrician has checked it. If you can't find a transformer, don't go looking for one inside the wall.

> Not sure what you've inherited? NightScapes offers free consultations and estimates in Naples and across Lee and Collier counties. [Request a free estimate](https://www.nightscapeslandscapelighting.com/request-estimate-form) or call (239) 649-6940.

Free Consultations and Estimates

[Request a free estimate](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#post-form) [or call (239) 649-6940](tel:+12396496940)

03Transformer and wire

## The transformer and the wire

The transformer is the heart of a low-voltage landscape lighting system. FX Luminaire's guide says transformers power the fixtures "by converting line-voltage current (120 V in North America or 220 V internationally) to low-voltage current (12 V)" \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. The low-voltage output can range from 12 to 15 volts depending on the number of voltage taps \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\], so a longer run can be fed a little more voltage.

The taps exist because wire loses voltage. FX explains: "A voltage drop in an electrical circuit normally occurs when current is passed through the wire to the fixtures. The greater the resistance of the circuit, the higher the voltage drop" \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]. It also warns that "incorrect wire size may result in voltage dropping past 10 VAC" \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\].

Operating voltage at the fixtureFX Luminaire's published voltage ranges for its fixtures, lamps and transformer taps

From a 12-volt tap, a run can lose 2 volts before an LED fixture falls below FX's 10-volt floor.

Range

LED fixtures, input at each fixture10 to 15 VAC

Color (ZDC) LED fixtures11 to 15 VAC

Lamps, for maximum light output and fixture life10.5 to 11.5 V

Transformer low-voltage output (taps)12 to 15 V

Manufacturer ranges for FX Luminaire products; other makes publish their own. Line voltage has no transformer and no taps.

| What FX publishes | Range | Source |
| --- | --- | --- |
| LED fixtures, input at each fixture | 10 to 15 VAC | \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\] |
| Color (ZDC) LED fixtures | 11 to 15 VAC | \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\] |
| Lamps, for maximum light output and fixture life | 10.5 to 11.5 V | \[[3](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-3)\] |
| Transformer low-voltage output (taps) | 12 to 15 V | \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\] |

Put those numbers together and the margin on a 12-volt system is small. From a 12-volt tap, a run can lose 2 volts before an LED fixture falls below FX's 10-volt floor. From a 15-volt tap, it can lose 5 \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]\[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]. FX also says the difference between the first and last fixture on a circuit "should not exceed 1 volt with a 0.5 volt differential being optimum" \[[3](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-3)\].

Line voltage has no transformer and no taps. How deep a 120-volt cable is buried and whether it runs in conduit are decisions for the licensed electrician doing the work. If a low-voltage transformer hums, trips or shuts off, our [transformer and timer repair page](https://www.nightscapeslandscapelighting.com/landscape-lighting-transformer-repair) walks through the cabinet in order.

04Florida law

## What Florida law exempts

Florida's electrical contracting law has an exemption written for landscape lighting. Under section 489.503 of the 2026 Florida Statutes, Part II of Chapter 489 (electrical and alarm system contracting) "does not apply to," in subsection (24): "A person who installs low-voltage landscape lighting that contains a factory-installed electrical cord with plug that does not require installation, wiring, or other modification to the electrical wiring of a structure" \[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\]\[[5](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-5)\].

Read word by word, it asks for three things at once:

1. The lighting is low-voltage landscape lighting.
2. It comes with a factory-installed electrical cord with a plug.
3. Installing it doesn't require installation, wiring or other modification to the electrical wiring of a structure \[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\].

A plug-in low-voltage system that plugs into an existing outdoor outlet is what the exemption describes. A hardwired transformer, a new outdoor outlet, a moved circuit or any line-voltage fixture is outside it. That work is for a licensed electrician.

The exemption doesn't say anyone may install any landscape lighting in Florida, and it covers who may install, not how well. FX notes that "with any low voltage lighting system, waterproof connections are crucial to maximizing the life of the system" \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\].

This is what the statute says, not legal advice. Your county or city building department can tell you what applies to a specific project.

05Water, sand and salt

## Water, sand and salt: what Southwest Florida changes

Water is where low voltage and line voltage differ most in practice. Near a pool or spa, the transformer's listing matters: FX Luminaire says its PX transformer's "UL-379 rating provides added safety when installing near pools and spas" \[[6](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-6)\]. Any 120-volt work near water, including a new outlet for a transformer by the pool deck, is work for a licensed electrician.

Fixtures sit in sprinkler spray and wet ground all summer, so enclosures matter too. The IEC developed the ingress protection (IP) ratings, which "grade the resistance of an enclosure against the intrusion of dust or liquids" \[[8](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-8)\]. Its first numeral rates solids from 0 (no protection) to 6 (no ingress of dust); the second rates liquids from 0 to 9 \[[8](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-8)\]. Check the spec sheet before a fixture goes into a planting bed or near the [pool and lanai](https://www.nightscapeslandscapelighting.com/pool-lanai-lighting).

Lightning is the Florida factor most guides skip. NWS Miami's 2023 lightning report calls Florida the "lightning capital" of the United States, and cites Vaisala data showing that in 2022 Florida led the country with an average of 285 lightning events per square mile \[[7](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-7)\]. NightScapes' transformer page names "salt, irrigation and lightning" as "the usual enemies of a transformer" in Lee and Collier counties.

Sand cuts both ways. Cable is easy to bury in a sandy Naples yard and just as easy to hit later with a shovel. At 12 volts that's a repair. At 120 volts it's a hazard.

06Light output

## Light output and fixture choice

Line voltage isn't brighter by default. Brightness comes from the fixture, not from the system's voltage. FX Luminaire says its LED fixtures "can vary in voltage and will all be the same brightness as long as between 10 and 15 volts is being supplied to each fixture" \[[3](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-3)\]. On a well-designed low-voltage system, the farthest fixture looks the same as the nearest one.

When an LED fixture on a low-voltage system misbehaves, voltage is the first suspect. FX's support page says: "The most common reason for an LED board inside a fixture to flash would be a drop in voltage" \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]. That's a wire and transformer question, and [our repair page](https://www.nightscapeslandscapelighting.com/landscape-lighting-repair) goes through it symptom by symptom.

Older halogen systems were less forgiving. FX's goal for lamps is between 10.5 and 11.5 volts "for maximum light output and fixture life" \[[3](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-3)\]. Moving an older halogen system to [LED in stages](https://www.nightscapeslandscapelighting.com/halogen-to-led-retrofit) widens that window to the 10 to 15 volts FX sets for its LED fixtures \[[2](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-2)\]\[[3](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-3)\].

07

Choose a question

- [Is my landscape lighting low voltage or 120 volts?](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#frequently-asked-questions-about-low-voltage-and-line-voltage-landscape-lighting-0)
- [Can I reuse the old wire?](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#frequently-asked-questions-about-low-voltage-and-line-voltage-landscape-lighting-1)
- [Is low voltage lighting safe near a pool?](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#frequently-asked-questions-about-low-voltage-and-line-voltage-landscape-lighting-2)
- [Can I install low voltage landscape lighting myself in Florida?](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#frequently-asked-questions-about-low-voltage-and-line-voltage-landscape-lighting-3)
- [Which is brighter, low voltage or line voltage?](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#frequently-asked-questions-about-low-voltage-and-line-voltage-landscape-lighting-4)

### Is my landscape lighting low voltage or 120 volts?

Look for a transformer. A low-voltage landscape lighting system has a box beside the house that steps 120 volts down to about 12, usually plugged into an outdoor outlet. Its label lists the input (120 VAC) and the output, which on a multi-tap transformer runs from 12 to 15 volts. If there's no transformer and the fixture cables run into a junction box or the wall, treat the system as 120 volts and have an electrician check it before anyone works on it.

### Can I reuse the old wire?

It depends on what the wire is. On a low-voltage system, existing two-conductor cable (FX names 16/2, 14/2 and 12/2 as the common sizes) can stay if its gauge suits the load and the run length, because the farthest LED fixture still needs at least 10 volts. Old line-voltage cable is a different matter. Whether any 120-volt wiring can be reused, rerouted or abandoned is a decision for a licensed electrician, not something to judge from the surface.

### Is low voltage lighting safe near a pool?

FX Luminaire's guide says a low-voltage system is, in general, "safer to manage compared to a line-voltage system". Near a pool the details still matter, because the transformer itself runs on 120 volts. FX says its PX transformer's UL-379 rating "provides added safety when installing near pools and spas". A new outlet near the pool, a hardwired transformer, or any line-voltage fixture near water is work for a licensed electrician. For the fixtures, check the IP rating.

### Can I install low voltage landscape lighting myself in Florida?

Florida's statute exempts one specific case from Part II of Chapter 489, the electrical and alarm system contracting law. Section 489.503(24) covers a person who installs low-voltage landscape lighting with "a factory-installed electrical cord with plug" that "does not require installation, wiring, or other modification to the electrical wiring of a structure". A plug-in kit going into an existing outdoor outlet is what it describes. A hardwired transformer, a new outlet or any 120-volt work is for a licensed electrician. Your county or city building department can confirm what applies to a project.

### Which is brighter, low voltage or line voltage?

Neither, by itself. The fixture and its light source decide how bright a landscape light is, not the system voltage. FX Luminaire says its LED fixtures "will all be the same brightness as long as between 10 and 15 volts is being supplied to each fixture". On a low-voltage system, the thing to watch is voltage drop on a long or undersized run, and FX names a drop in voltage as the most common reason an LED board flashes.

[Ask us on the phone: (239) 649-6940](tel:+12396496940)

Related services

- [![Lit palms beside a screened lanai at night](https://www.nightscapeslandscapelighting.com/img/ns-job-screened-lanai-palms-960.webp) Transformer and Timer Power and control faults View service](https://www.nightscapeslandscapelighting.com/landscape-lighting-transformer-repair)
- [![Trees uplit from a planting bed at night](https://www.nightscapeslandscapelighting.com/img/ns-job-palm-stand-night-960.webp) Halogen to LED Retrofit Convert an older system View service](https://www.nightscapeslandscapelighting.com/halogen-to-led-retrofit)
- [![The view from inside a screened lanai at night: a dark pool, uplit palms and planting beyond the screen, lights across the water](https://www.nightscapeslandscapelighting.com/img/ns-job-lanai-lake-view-1600.webp) Pool and Lanai Lighting Screened enclosures and pool decks View service](https://www.nightscapeslandscapelighting.com/pool-lanai-lighting)
- [![A white home at dusk with its arched entry, facade, planting and drive lit as one scheme](https://www.nightscapeslandscapelighting.com/img/ns-job-arched-entry-home-1600.webp) Landscape Lighting Full-property design and install View service](https://www.nightscapeslandscapelighting.com/landscape-lighting)

08Next step

## What to do next

Low voltage vs line voltage landscape lighting is a question you can usually answer from the box beside the house. A transformer plugged into an outdoor outlet means a 12-volt system \[[1](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-1)\]. No transformer means you treat it as 120 volts and call an electrician. Florida's s. 489.503(24) exemption is specific to plug-in low-voltage systems that need no change to a structure's wiring \[[4](https://www.nightscapeslandscapelighting.com/blog/low-voltage-vs-line-voltage-landscape-lighting#ref-4)\].

NightScapes has designed, installed and repaired [outdoor lighting in Naples](https://www.nightscapeslandscapelighting.com/landscape-lighting) since 2006 (Todd since 1998), and outdoor lighting is all we do. If you've inherited a system and want to know what's in the ground, call (239) 649-6940 or [request a free estimate](https://www.nightscapeslandscapelighting.com/request-estimate-form).

Share this guide

- [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fwww.nightscapeslandscapelighting.com%2Fblog%2Flow-voltage-vs-line-voltage-landscape-lighting)
- [X](https://twitter.com/intent/tweet?url=https%3A%2F%2Fwww.nightscapeslandscapelighting.com%2Fblog%2Flow-voltage-vs-line-voltage-landscape-lighting&text=Low%20Voltage%20or%20Line%20Voltage%20Landscape%20Lighting%20in%20Florida%3A%20How%20They%20Differ)
- [LinkedIn](https://www.linkedin.com/sharing/share-offsite/?url=https%3A%2F%2Fwww.nightscapeslandscapelighting.com%2Fblog%2Flow-voltage-vs-line-voltage-landscape-lighting)
- [Email](mailto:?subject=Low%20Voltage%20or%20Line%20Voltage%20Landscape%20Lighting%20in%20Florida%3A%20How%20They%20Differ&body=https%3A%2F%2Fwww.nightscapeslandscapelighting.com%2Fblog%2Flow-voltage-vs-line-voltage-landscape-lighting)

09Sources

## References

1. FX Luminaire (Hunter Industries). *Landscape Lighting Design Guide (FX-229)*. 2021. [fxl.com/sites/fxl.com/files/fx-229-dg-lightingtraining-us-web.pd](https://www.fxl.com/sites/fxl.com/files/fx-229-dg-lightingtraining-us-web.pdf)
2. FX Luminaire (Hunter Industries). *Luxor: LED Fixture Flashing* (support article). Page undated. Read October 23, 2026. [fxl.com/support/luxor-led-fixture-flashing](https://www.fxl.com/support/luxor-led-fixture-flashing)
3. FX Luminaire (Hunter Industries). *LED System Layout* (support article). Page undated. Read October 23, 2026. [fxl.com/led-system-layout](https://www.fxl.com/led-system-layout)
4. The Florida Legislature. *The 2026 Florida Statutes, Section 489.503, Exemptions*. 2026. Read October 23, 2026. [leg.state.fl.us/statutes/index.cfm](https://www.leg.state.fl.us/statutes/index.cfm?App_mode=Display_Statute&URL=0400-0499/0489/Sections/0489.503.html)
5. The Florida Legislature. *The 2026 Florida Statutes, Chapter 489, Contracting (contents: Part II, Electrical and Alarm System Contracting)*. 2026. Read October 23, 2026. [leg.state.fl.us/statutes/index.cfm](https://www.leg.state.fl.us/statutes/index.cfm?App_mode=Display_Statute&URL=0400-0499/0489/0489ContentsIndex.html)
6. FX Luminaire (Hunter Industries). *PX transformer, product page*. Page undated. Read October 23, 2026. [fxl.com/product/transformers/standard/px](https://www.fxl.com/product/transformers/standard/px)
7. National Weather Service Miami. *2023 Severe Weather Awareness Week: Lightning Awareness Day*. February 2023. [weather.gov/media/mfl/news/LightningWeb\_2023.pdf](https://www.weather.gov/media/mfl/news/LightningWeb_2023.pdf)
8. International Electrotechnical Commission (IEC). *Ingress Protection (IP) ratings*. Page undated. Read October 23, 2026. [iec.ch/ip-ratings](https://www.iec.ch/ip-ratings)

Written by

[NightScapes Landscape Lighting, owners Todd and Sherry](https://www.nightscapeslandscapelighting.com/about)

NightScapes has designed, installed and repaired outdoor lighting in Naples since 2006 (Todd since 1998), and outdoor lighting is all we do.

[About NightScapes](https://www.nightscapeslandscapelighting.com/about) [All posts](https://www.nightscapeslandscapelighting.com/blog)

Share

Free Consultations and Estimates

[or call (239) 649-6940](tel:+12396496940)
